YES, SpreadRock is a very tough granular multi-colored mix of stone that you spread onto the surface to add a durable and attractive new stone layer that can last for many years.

SpreadRock is a simple three-step process requiring a coat of DAICH Textured Primer (to anchor into the concrete and create an optimal bonding surface), followed by two thin coats of SpreadRock – and DAICH sealer the following day. With dry times in between, the SpreadRock system can be applied easily over a weekend for lasting beauty and performance.

SpreadRock® covers up to 60 sq.ft. of surface per gallon per coat. Two coats are required for the most uniform looking and lasting results. If the surface is pitted or very textured – or if the product is applied thicker than required – coverage area may be reduced.

Yes, SpreadRock needs to be sealed to protect your new finish from water and and dirt penetration, and keep it looking clean. Use either DAICH Ultra Clear Coat Sealer — or for added slip resistance in wet conditions, use DAICH TracSafe Anti-Slip Sealer.

Apply sealer only after your completed SpreadRock application has cured for 24 hours.

Use a drill mixing attachment for fast, easy and thorough mixing of SpreadRock stone coating.

Since, you will be applying SpreadRock very thinly (to achieve correct coverage), it will dry fairly quickly. Outdoors, in warm, dry weather, allow dry time between coats of about 2 – 3 hours to ensure that it is firm enough to accommodate your weight when you walk on it to apply the second coat.

No, SpreadRock cannot be applied with a paint roller.  SpreadRock is a thick stone paste you skim onto the surface using either a hand trowel with rounded corners (also called a “pool trowel”) or a SpreadRock Squeegee Trowel to apply from a standing position.

Follow these rules during application for excellent results:

Rule#1: If you receive SpreadRock with different batch numbers, mix them together in a different container with a drill mixer before use. This will ensure that minor color shifts between batches are eliminated and not visible in your finished result.

Rule#2: Always work “wet-in-wet” with SpreadRock. Keep a water spray bottle handy (see the instruction video) to keep edges moist and encourage smooth blending.

Rule#3: Apply a smooth uniform THIN coat of SpreadRock and then leave it alone. Don’t repeatedly disturb the stones once they have been applied to the surface which can create a “textured shadow effect” in the finish that appears like lighter and darker areas.